Professional water pressurization system for inland shipping, seagoing shipping and recreational craft.
For many years the top selling pressurized water system in inland shipping.
Comes with pressure vessel, non-return valve, manometer, pressure switch and if required electric pump.
type: PM (Pumpmeister)
colour: light green
pump type: self-priming plunger pump
impeller type: plunger (piston)
motor type: brush motor or induction motor
shaft seal: stop bush
materials: plunger : Simrit
: cyl. bus : stainless steel (PM10) or brass (PM15/20/30)
: pump housing : cast iron
: pump shaft : stainless steel
liquids: clean water
voltages: 12 V DC
: 24 V DC (2 year IDEAAL guarantee)
: 230 V mains
: 400 V three phase
capacity: 1,000 litres per hour at 3.5 bar
suction height: 8.0 metres
type pressure vessel: horizontal 100 l. galvanized vessel with approx. 15 litres useful water capacity
switch on pressure: 2.0 bar
switch off pressure: 3.5 bar
suitable for: geyser and 2 or 3 draw off points*
connections: 1" internal thread
dimensions: lxwxh = 1000 x 430 x 760 mm**
weight: 57 kg**
amperage: 12 V, 35.0 A
: 24 V, 17.4 A (Ideaal 15.0 A)
: 230 V, 3.1 A
: 400 V, 0.8 A
shaft power: 0.25 kW, 0.33 hp at 1,450 rpm
Must be connected up by an accredited installer.
Most dimensions relate to 24 volt motor.
* Not in use simultaneously.
** Dimensions and weight depend on motor type.