stainless steel submersible pump for use in well point dewatering or for other purposes where a high pressure is called for.
Can be used in shipping as a deck wash pump.
type: Hydro-NHB
colour: stainless steel
pump type: completely submersible centrifugal pump
impeller type: closed impeller
motor type: dry motor
submersion depth: 5 metres
fuse: inbuilt thermal safeguard at 230 volt for 400 volt a motor safeguarding switch in the cable is necessary
shaft seal: oil chamber with 2 shaft seals, the lower is a wear resistant silicon carbon on ceramic mechanical seal and a lip seal on the motor side
materials: impeller : Noryl
: impeller housing : stainless steel 304
: motor housing : stainless steel 304
: pump shaft : stainless steel EN 10088-3, 1.4104
liquids: clean water
voltages: 230 V mains
: 400 V three phase
no head: 7,200 litres per hour
25 metres head: 7,080 litres per hour
30 metres head: 6,720 litres per hour
35 metres head: 6,300 litres per hour
40 metres head: 5,400 litres per hour
45 metres head: 4,560 litres per hour
50 metres head: 3,120 litres per hour
55 metres head: 1,800 litres per hour
discharge head: 56.0 metres maximum
pumps down to: 35 mm maximum
particle size: 2.0 mm maximum
connection: 1.1/4" internal thread
dimensions: diameter 135 mm, height 621 mm
weight: 230 V, 18.6 kg
: 400 V, 17.5 kg
amperage: 230 V, 7.2 A
: 400 V, 2.8 A
shaft power: 1.1 kW, 1.5 hp, 2850 rpm
cable: 20 metre neoprene H07RN-F without plug.
|