A modern pressurised water system, with insulation class IP55.
Very quiet pump for drinking water system.
Ideally suited for installation in tight spaces.
Pump starts when the tap is opened and stops when it is closed.
The frequency regulator ensures a constant pressure in the system, related to the desired amount of water.
Using a regulator greatly reduces noise, vibration and energy consumption and leads to lower operating and maintenance costs.
type: WACS
colour: dark green and stainless steel
pump type: self-priming centrifugal pump
impeller type: closed
motor type: induction motor
fuse: built-in thermal protection
seal: mechanical seal (ceramic on carbon)
materials: impeller : plastic
: pump housing : plastic
: pump shaft : stainless steel
liquids: clean water
voltage: 230 volts AC
suction head: 8.0 meters when using foot valve
pressure tank type: separately-supplied water hammer arrester 2 litres
switch-on pressure: 2.5 bar 3,500 litres per hour, default setting
switch-off pressure: 3.0 bar
suitable for: water heater and 6 taps
connections: 1” inner thread
dimensions: LxWxH 520 x 175 x 560 mm
weight: 13.0 kg
insulation class: IP55
shaft power: 0.87 kW, 1.16 hp, 3000 rpm
voltage: pump Is 400 volt, 3x230V (3 phases)
|