stainless steel submersible pump for use in well point dewatering or for other purposes where a high pressure is called for.
Can be used in shipping as a deck wash pump.
type: Hydro-NHB
colour: stainless steel
pump type: completely submersible centrifugal pump
impeller type: closed impeller
motor type: dry motor
submersion depth: 5 metres
fuse: inbuilt thermal safeguard at 230 volt for 400 volt a motor safeguarding switch in the cable is necessary
shaft seal: oil chamber with 2 shaft seals, the lower is a wear resistant silicon carbon on ceramic mechanical seal and a lip seal on the motor side
materials: impeller : Noryl
: impeller housing : stainless steel 304
: motor housing : stainless steel 304
: pump shaft : stainless steel EN 10088-3, 1.4104
liquids: clean water
voltages: 400 V three phase
no head: 7,200 litres per hour
35 metres head: 7,020 litres per hour
40 metres head: 6,480 litres per hour
45 metres head: 5,880 litres per hour
50 metres head: 5,940 litres per hour
55 metres head: 4,440 litres per hour
60 metres head: 3,780 litres per hour
65 metres head: 2,640 litres per hour
70 metres head: 1,560 litres per hour
discharge head: 72.0 metres maximum
pumps down to: 35 mm maximum
particle size: 2.0 mm maximum
connection: 1.1/4" internal thread
dimensions: diameter 153 mm, height 543 mm
weight: 22.8 kg
amperage: 3.2 A
shaft power: 1.5 kW, 2.0 hp, 2850 rpm
cable: 20 metre neoprene H07RN-F without plug