Slim elegant stanchions for plenty of space on deck.
Guard rail with two wires; one at 90 cm and a second one at 45 cm height.
Made of aluminum or stainless steel 316 high gloss.
Available in a fixed or flexible version, which reduces the risk of damage when mooring or in case of a collision.
Easy to replace after any damage, such as breakage.
The wires are also easy to exchange, because the wire ends can be fed through the holes in the scepter.
Stanchions with two feed-through holes of 12 mm, in the stainless steel version this is done with a special feed-through tube with rounded ends.
Material: aluminum or stainless steel 316 high-gloss
Height wires: 900 and 450 mm
Diameter stanchion: aluminum : 30.0 x 5 mm
: stainless steel 316 : 33.7 x 2 mm
Diameter wire: 6/8 mm, 6mm, 6x19 galvanized steel and PVC transparent coating of 1 mm
SCALE:
20 itemsFK
REGULATIONS GUARD RAIL FOR INLAND VESSELS
According to the latest requirements of the Shipping Inspectorate: ES-TRIN 2019
ES-TRINArticle 14.02, paragraph 4 - Protection against falling
The outer edges of decks and side decks, as well as work stations where persons might fall more than 1 m, shall be fitted with bulwarks or coamings that are at least 0,90 m high or with a continuous guard rail in accordance with European Standard EN 711 : 2016. Where the shipside guard rails are retractable,
a) a continuous handrail 0,02 to 0,04 m in diameter shall additionally be secured to the coaming at a height of 0,7 to 1,1 m; and
b) signs in accordance with Annex 4, Figure 10, at least 15 cm in diameter, shall be affixed in clearly visible positions at the point where the side deck begins.
In order to take into account the corresponding transitional provisions and to ensure that the existing fleet is adapted, the following footnote has been added for Articles 32.02 and 33.02 in conjunction with article 14.02 paragraph 4:
However at the latest on renewal of the inland navigation vessel certificate after 1.1.2015, the craft must comply with the following requirements:
- The outer edges of the decks, as well as work stations where persons might fall more than 1 m, shall be fitted with bulwarks or coamings that are at least 0,70 m height or with continuous guard rails in accordance with European Standard EN 711 : 1995, comprising a handrail, intermediate rail at knee height and foot rail.
- Side decks shall be fitted with a foot rail and continuous handrail that is secured to the coaming. Coaming handrails shall not be required where side decks are fitted with non-retractable shipside guard rails.