90.10.220 - Grundf.kp250 +bal-vlotter 230v

Robust all stainless steel cylinder pump, very suitable for shipping, construction and industry. The ideal bilge and ballast pump.

type: KP
colour: stainless steel
pump type: completely submersible centrifugal pump
impeller type: open impeller
motor type: spec. liquid filled motor
fuse: inbuilt thermal safeguard only with 230 volt version
shaft seal: NBR rubber lip seal
submersion depth: 10 metres maximum
materials: impeller : stainless steel 304
: impeller housing : stainless steel 304
: motor housing : stainless steel 304
: pump shaft : steel
liquids: slightly contaminated water and water with a somewhat higher acidity, and continuously at a temperature of 50°C
voltages: 230 volt mains

no head: 11,000 litres per hour
5 metres head: 6,200 litres per hour
discharge head: 7.5 metres maximum
pumps down to: 14 mm, (only without float)
particle size: 10 mm, no sand or gravel
connection: 1.1/4" internal thread
dimensions: diameter 149 mm, height 225 mm (diam + float : 220 mm)
weight: 7.2 kg
amperage: 2.3 A
shaft power: 0.24 kW, 0.32 hp
cable: 10 metre neoprene H07RN-F with earthed plug also plug connection on pump side
switch level: with ball float : start 325 mm minimum
: stop 100 mm minimum
: with vertical float : start 180 mm minimum
: stop 100 mm minimum