Deck wash and bilge pump based on the original moulds of the former K&R SAE pump series.
Reliable pumps with impressive pressure and/or volume performance.
Affordable and reliable.
Use as deck wash pump, for jet-washing holds, as a fire pump, for overhead irrigation, for ballast water, drainage and as a general service pump.
type: HEWA
colour: blue
type pump: self-priming centrifugal pump
impeller type: open impeller
type of motor: squirrel-cage motor
fuse: NOT built-in
insulation class: IP55
seal: carbon on SiC mechanical seal with viton
materials: impeller : bronze
: wear plate : bronze
: pump housing : cast iron
: pump shaft : Stainless steel A4
liquids: clean and contaminated liquids with relatively coarse constituents, such as water, sea water, etc.
voltage: 400 volt power current
no head: 55,000 litres per hours
at 5 meters: 52,500 litres per hour
at 10 meters: 48,000 litres per hour
at 15 meters: 42,750 litres per hour
at 20 meters: 36,000 litres per hour
at 25 meters: 28,250 litres per hour
at 30 meters: 19,500 litres per hour
at 35 meters: 7,000 litres per hour
discharge head: at 36.0 meters maximum PRESSURE PUMP
suction head: 8.0 meters
particle size: 8 mm maximum
connections: DIN flange 50
dimensions: LxWxH 653 x 190 x 398 mm
weight: 100 kg
current: 11.8 amp
shaft power: 5.5 kW, 7.3 hp, 2,900 rpm
|