Deck wash and bilge pump based on the original moulds of the former K&R SAE pump series.
Reliable pumps with impressive pressure and/or volume performance.
Affordable and reliable.
Use as deck wash pump, for jet-washing holds, as a fire pump, for overhead irrigation, for ballast water, drainage and as a general service pump.
type: HEWA
colour: blue
type pump: self-priming centrifugal pump
impeller type: open impeller
type of motor: squirrel-cage motor
fuse: NOT built-in
insulation class: IP55
seal: carbon on SiC mechanical seal with viton
materials: impeller : bronze
: wear plate : bronze
: pump housing : cast iron
: pump shaft : Stainless steel A4
liquids: clean and contaminated liquids with relatively coarse constituents, such as water, sea water, etc.
voltage: 400 volt power current
no head: 70,000 litres per hour
at 30 meters: 70,000 litres per hour
at 35 meters: 63,000 litres per hour
at 40 meters: 52,500 litres per hour
at 45 meters: 42,000 litres per hour
at 50 meters: 28,000 litres per hour
discharge head: 54.0 meters maximum
suction head: 8.0 meters
particle size: 8 mm maximum
connections: DIN flange 80
dimensions: LxWxH 785 x 215 x 455 mm
weight: 166 kg
current: 19.5 amp
shaft power: 11.0 kW, 14.6 hp, 2,900 rpm
|