97.34.024 - Hydrof. j-mini 24/epc 24v

A modern water pressure installation.
Very low-noise pump for drinking water system.
Extremely suitable for installing in small areas thanks to the absence of a large pressure vessel; is, however, available with 2 or 20 litre pressure vessel in stainless steel.
Pump starts when tap opens and stops when tap closes.
Including non-return valve.

type: J-Mini
colour: blue, white and stainless steel
pump type: self-priming centrifugal pump
impeller type: closed
fuse: built-in thermal fuse at 230 volt, not at 24 volt!
shaft seal: carbon ceramic mechanical seal and NBR
materials: impeller : Noryl
: pump housing : Stainless steel 304
: pump shaft : Stainless steel 316
liquids: clean water, maximum 40 °C
voltage: 24 volt and 230 volt mains, 12 volt on demand
suction height: 8.0 metre on using foot valve
pressure vessel type: none, 2 litre stainless steel, or 20 litre stainless steel

cut-in pressure: 2.0 bar : 3,300 L/h, standard setup
cut-out pressure: 3.0 bar
suitable for: geyser and 3 tapping points
connections: suction 1" : female thread
: pressure 1" : male thread
dimensions: l x w x h = 430 x 160 x 331 mm, without boiler
weight: 7.0 kg, without boiler
insulation class: IP23
motor type: permanent magnet motor
amperage: 16.0 A
shaft power: 0.4 kW, 0.5 hp, 2,600 tpm