stainless steel submersible pump for removing cargo residues from holds, for pumping sewage, for pumping out dirty water tanks.
The advantage of this pump is the vortex impeller. There is less chance of plugging or jamming.
type: DOMO
colour: stainless steel
pump type: completely submersible centrifugal pump
impeller type: recessed impeller (vortex)
motor type: dry motor
submersion depth: 5 metres
fuse: inbuilt thermal safeguard for 230 volt for 400 volt a motor safeguarding switch in the cable is necessary
shaft seal: drive lube seal system, oil chamber with 2 shaft seals, the lower is a wear resistant silicon carbide on silicon carbide mechanical seal and a lip seal on the motor side, everything lubricated by the drive lube system
materials: impeller : stainless steel 304
: impeller housing : stainless steel 304
: motor housing : stainless steel 304
: pump shaft : stainless steel 304
liquids: contaminated water containing solids and high acidity with a max. temperature 40°C for completely submersed pump
voltages: 230 V mains
: 400 V three phase
no head: 33.600 litres per hour
5 metres head: 28.800 litres per hour
10 metres head: 9.600 litres per hour
discharge head: 11.3 metres maximum
pumps down to: 50 mm maximum
impeller: stainless steel 304
particle size: 50 mm maximum, no gravel
connection: 2" internal thread
dimensions: diameter 198 mm, height 453 mm
weight: 14.4 kg
amperage: 3.4 A
shaft power: 1.5 kW, 2.0 hp, 2850 rpm
cable: 5 metre neoprene H07RN-F without plug
|