Ideal for rapidly pumping liquid from vats.
For use in engine rooms, industry, laboratories and wherever needed.
type: BP
colour: galvanized steel
pump type: plunger pump
impeller type: plunger (piston)
motor type: air motor with 1/4" internal thread
fuse: N.A.
shaft seal: O-ring
materials: piston : steel
: cylinder : steel
: pump housing : galvanized steel
: pump shaft : steel
liquids: clean gas oil, kerosene, petroleum, lubricating oil (not petrol)
transmission: 1:1
viscosity: has a very substantial effect on capacity
capacities: measured with water
no head: 2,700 litres per hour
5 metres head: 2,700 litres per hour
10 metres head: 2,520 litres per hour
15 metres head: 2,400 litres per hour
20 metres head: 2,280 litres per hour
25 metres head: 2,170 litres per hour
30 metres head: 1,950 litres per hour
35 metres head: 1,800 litres per hour
40 metres head: 1,620 litres per hour
45 metres head: 1,440 litres per hour
50 metres head: 1,200 litres per hour
55 metres head: 960 litres per hour
60 metres head: 720 litres per hour
65 metres head: 360 litres per hour
discharge head: 66.0 metres maximum
suction head: N.A.
particle size: approx. 2 mm maximum, not abrasive
pumps down to: 10 mm
connections: discharge : 3/4" internal thread
air supply: 1/4" internal thread
inlet: 910 mm steel suction pipe with drum connection
dimensions: diameter 85/50 mm, height 1177 mm
weight: 5.0 kg
air pressure: 1.5 through 7.0 bar
air consumption: 3.8 through 7 litres air per litre liquid to be pumped