93.90.413 - Saer tandradpomp cfp12-6 400v

The pumps can be used for transporting low viscosity and lubricating liquids without solids or abrasive components, such as diesel oil, light lubricating oil, spindle oil, preheated grease and gas oil.

type: SAER
colour: olive green
pump type: gearwheel pump, limited self-priming
impeller type: gearwheels
fuse: NOT inbuilt
shaft seal: lip seal
materials: gearwheels : 1 brass gearwheel
: 1 steel gearwheel
: pump housing : cast steel
: pump shaft : toughened steel
liquids: clean lubricating oil and neutral low viscosity liquids with lubricating properties
voltage: 230 V mains
: 400 V three phase

viscosity: has a very big effect on capacity, maximum 20 Engler
capacities: measured with water
no head: 720 litres per hour
30 metres head: 720 litres per hour
50 metres head: 600 litres per hour
discharge head: 70 metres maximum
suction head: depends on viscosity
particle size: zero
connections: 3/4" internal thread
dimensions: lxwxh = 310 x 150 x 180 mm
weight: 8.8 kg
amperage: 3.0 A
shaft power: 0.37 kW, 0.5 hp, 1390 rpm