Professional water pressurization system for inland shipping, seagoing shipping and recreational craft.
For many years the top selling pressurized water system in inland shipping.
Comes with pressure vessel, non-return valve, manometer, pressure switch and if required electric pump.
type: PM (Pumpmeister)
colour: light green
pump type: self-priming plunger pump
impeller type: plunger (piston)
motor type: brush motor or induction motor
shaft seal: stop bush
materials: plunger : Simrit
: cyl. bus : stainless steel (PM10) or brass (PM15/20/30)
: pump housing : cast iron
: pump shaft : stainless steel
liquids: clean water
voltages: 12 V DC
: 24 V DC (2 year IDEAAL guarantee)
: 230 V mains
: 400 V three phase
capacity: 1,500 litres per hour at 3.5 bar
suction height: 8.0 metres
type pressure vessel: horizontal 200 l. galvanized vessel with approx. 30 litres useful water capacity
switch on pressure: 2.0 bar
switch off pressure: 3.5 bar
suitable for: geyser and 2 to 5 draw off points*
connections: 1" internal thread
dimensions: lxwxh = 1300 x 550 x 920 mm**
weight: 83 kg**
amperage: 24 V, 17.4 A, 250 watt
: 230 V, 4.4 A
: 400 V, 1.1 A
shaft power: 24V : 0.25 kW, 0.33 hp at 1,450 rpm
: 230V, 400V : 0.37 kW, 0.50 hp at 1,450 rpm
Must be connected up by an accredited installer.
Most dimensions relate to 24 volt motor.
* Not in use simultaneously.
** Dimensions and weight depend on motor type.
|