Well-known and well-made self-priming pump for dirty water. Can be used as a bilge, deck wash, dewatering, sprinkling and fire extinguishing pump.
type: KGEF
colour: blue
pump type: self-priming centrifugal pump
impeller type: open impeller or closed impeller
motor type: short circuit motor for 400 volt
: induction motor for 230 volt
fuse: not inbuilt
shaft seal: ceramic on carbon mechanical seal
materials: impeller : cast iron (bronze)*
: impeller : polyamide 11-3 and 11-4
: pump housing : cast iron (bronze)*
: pump shaft : chromed steel
liquids: contaminated liquids such as water, sea water, diesel, gas oil and fuel oil (maximum temperature +95°C)
voltages: 400 V three phase and 1 pump 230 V mains
no head: 50,000 litres per hour
5 metres head: 50,000 litres per hour
10 metres head: 50,000 litres per hour
15 metres head: 32,000 litres per hour
20 metres head: 12,000 litres per hour
discharge head: 23.0 metres maximum
suction head: 8.1 metres maximum
impeller type: open cast iron impeller
particle size: 20 mm maximum
connections: 2.1/2" internal thread
dimensions: lxwxh = 588 x 225 x 360 mm
weight: 75 kg
amperage: 6.3 A+
shaft power: 3.0 kW, 4 hp, 2850 rpm
* Available on request
* So too is complete Ni-resist
* When starting up the pump always check the amperage on the electric motor's nameplate. Small differences between different motors are possible.
|