Well-known and well-made self-priming pump for dirty water. Can be used as a bilge, deck wash, dewatering, sprinkling and fire extinguishing pump.
type: KGEF
colour: blue
pump type: self-priming centrifugal pump
impeller type: open impeller or closed impeller
motor type: short circuit motor for 400 volt
: induction motor for 230 volt
fuse: not inbuilt
shaft seal: ceramic on carbon mechanical seal
materials: impeller : cast iron (bronze)*
: impeller : polyamide 11-3 and 11-4
: pump housing : cast iron (bronze)*
: pump shaft : chromed steel
liquids: contaminated liquids such as water, sea water, diesel, gas oil and fuel oil (maximum temperature +95°C)
voltages: 400 V three phase and 1 pump 230 V mains
no head: 58,000 litres per hour
5 metres head: 58,000 litres per hour
10 metres head: 58,000 litres per hour
15 metres head: 58,000 litres per hour
20 metres head: 50,000 litres per hour
25 metres head: 40,000 litres per hour
30 metres head: 30,000 litres per hour
35 metres head: 17,000 litres per hour
discharge head: 37.5 metres maximum PRESSURE PUMP
suction head: 6.5 metres maximum
impeller type: open cast iron impeller
particle size: 12 mm maximum
connections: 2.1/2" internal thread
dimensions: lxwxh = 626 x 247 x 380 mm
weight: 107 kg
amperage: 11.0 A+
shaft power: 5.5 kW, 7.5 hp, 2850 rpm
* Available on request
* So too is complete Ni-resist
* When starting up the pump always check the amperage on the electric motor's nameplate. Small differences between different motors are possible.