Well-known and well-made self-priming pump for dirty water. Can be used as a bilge, deck wash, dewatering, sprinkling and fire extinguishing pump.
type: KGEF
colour: blue
pump type: self-priming centrifugal pump
impeller type: open impeller or closed impeller
motor type: short circuit motor for 400 volt
: induction motor for 230 volt
fuse: not inbuilt
shaft seal: ceramic on carbon mechanical seal
materials: impeller : cast iron (bronze)*
: impeller : polyamide 11-3 and 11-4
: pump housing : cast iron (bronze)*
: pump shaft : chromed steel
liquids: contaminated liquids such as water, sea water, diesel, gas oil and fuel oil (maximum temperature +95°C)
voltages: 400 V three phase and 1 pump 230 V mains
no head: 27,500 litres per hour
5 metres head: 27,500 litres per hour
10 metres head: 27,500 litres per hour
15 metres head: 27,500 litres per hour
20 metres head: 27,500 litres per hour
25 metres head: 26,000 litres per hour
30 metres head: 24,000 litres per hour
35 metres head: 22,500 litres per hour
40 metres head: 19,000 litres per hour
45 metres head: 16,000 litres per hour
50 metres head: 9,000 litres per hour
discharge head: 52.0 metres maximum PRESSURE PUMP
suction head: 6.7 metres maximum
impeller type: closed cast iron impeller
particle size: 4 mm maximum
connections: 2" internal thread
dimensions: lxwxh = 730 x 320 x 460 mm
weight: 135 kg
amperage: 11.0 A+
shaft power: 5.5 kW, 7.5 hp, 2850 rpm
* Available on request
* So too is complete Ni-resist
* When starting up the pump always check the amperage on the electric motor's nameplate. Small differences between different motors are possible.