91.69.463 - Zenit atex drg 250/2/g65v 400v

Submersible pump for pumping out bilge water on ADN vessels.

type: DRG
colour: grey
pump type: completely submersible centrifugal pump
impeller type: single-channel impeller
motor type: dry motor
submersion depth: 5 metres
fuse: for 400 volt a motor safeguarding switch in the cable is necessary
shaft seal: drive lube seal system, oil chamber with 2 shaft seals, both wear resistant silicon carbide on silicon carbide and extra lip seal at motor bearing
materials: impeller : cast iron EN-GJL 250
: impeller housing : cast iron EN-GJL 250
: motor housing : cast iron EN-GJL 250
: pump shaft : Stainless steel AISI 431
liquids: contaminated water containing solids, maximum temperature +40°C
insulation class: IP68
voltages: 400 V three phase
ATEX: II 2G
: Ex db IIB T4 Gb
: Ex h IIB T4 Gb

no head: 75,000 litres per hour
5 metres head: 64,000 litres per hour
10 metres head: 37,000 litres per hour
15 metres head: 10,000 litres per hour
discharge head: 18.0 metres maximum
pumps down to: 70 mm maximum
particle size: 30 mm maximum
connection: 2.1/2" internal thread
dimensions: diameter 327 mm (incl. knee), height 581 mm
weight: 33.0 kg
amperage: 3,7 A
shaft power: 1.8 kW, 2.4 hp, 2900 rpm
cable: 10 metre neoprene H07RN-F without plug