ALPHA F02RA-T 3 HP DIRTY WATER 400V
Zoom image
ALPHA F02RA-T 3 HP DIRTY WATER 400V

Product Description

Especially for dirty water with solids, a higher viscosity or a higher specific gravity (heavier) because these pumps have an extra powerful motor.
Pumping out dirty water tanks, faeces (without coarse and/or hard components) etc.

Type: F 02RA-T
Colour: blue
Pump type: self-priming centrifugal pump
Impeller type: open impeller
Motor type: short circuit motor with 400 volt
Fuse: inbuilt thermal safeguard only with the 230 volt motors
Shaft seal: ceramic on carbon mechanical seal
Material impeller: cast iron
Material pump housing: cast iron
Material pump shaft: stainless steel AISI 420
Liquids: water with a lot of solids, a higher viscosity or a higher s.g.
10 metres head: 25,200 litres per hour
15 metres head: 16,200 litres per hour
Connections: 2" internal thread
Dimensions: lxwxh = approx. 502 x 205 x 321 mm
Weight: approx. 30,5 kg
Amperage: 5.7 A
Shaft power: 2.2 kW, 3.0 hp, 2800 rpm

  • 92.92.040 - ALPHA F02RA-T 3 PK VUILWATER 400V - Datasheet

Product code 92.92.040
Suction head 7.0 m
Pipe diameter pressure 2"
Pipe diameter suction 2"
Pump type Dry set-up pump: self-priming
Medium Water
Medium Water with coarse components
Particle size 14 mm
Discharge head Max. 19.0 m
Voltage 400 V
Current AC
Frequency 50 Hz
Fuel -
Protection class IP68
ATEX No
Separate float switch -
Free flow (L/Hour) 27000
Capacity 5 meter (L/hour) 27000

Not been able to find what you are looking for?

Please do not hesitate to contact us by phone or email.