Zoom image
C.E.M. PRESSURIZED WATER SYSTEM J-MINI 230M/EPC 230V
C.E.M. PRESSURIZED WATER SYSTEM J-MINI 230M/EPC 230V
Multiple variants available
Select the desired variant below or click on the button to view & order all variants.
Do you want to order our products?
Description
If you are interested in our products, you can apply for an account with us. However, we do impose a few conditions for our customers. End users/shipping companies in the Inland Shipping sector and private individuals can only order our products through our dealer network. For more information about our dealer network, you can always contact us. ContactProduct Description
A modern water pressure installation.
Very low-noise pump for drinking water system.
Extremely suitable for installing in small areas thanks to the absence of a large pressure vessel; is, however, available with 2 or 20 litre pressure vessel in stainless steel.
Pump starts when tap opens and stops when tap closes.
Including non-return valve.
Type: J-Mini
Colour: blue, white and stainless steel
Pump type: self-priming centrifugal pump
Impeller type: closed
Fuse: built-in thermal fuse at 230 volt, not at 24 volt!
Shaft seal: carbon ceramic mechanical seal and NBR
Material impeller: Noryl
Material pump housing: Stainless steel 304
Material pump shaft: Stainless steel 316
Liquids: clean water, maximum 40 °C
12-volt version available on request
Suction height: 8.0 metre on using foot valve
Cut-in pressure: 2.0 bar: 3,300 L/h, standard setup
Cut-out pressure: 3.0 bar
Dimensions: l x w x h = 380 x 160 x 331 mm, without boiler
Weight: 8.5 kg, without boiler
Insulation class: IP55
Motor type: brushless motor
Amperage: 3.6 A
Shaft power: 0.55 kW, 0.75 hp, 2,800 tpm
Very low-noise pump for drinking water system.
Extremely suitable for installing in small areas thanks to the absence of a large pressure vessel; is, however, available with 2 or 20 litre pressure vessel in stainless steel.
Pump starts when tap opens and stops when tap closes.
Including non-return valve.
Type: J-Mini
Colour: blue, white and stainless steel
Pump type: self-priming centrifugal pump
Impeller type: closed
Fuse: built-in thermal fuse at 230 volt, not at 24 volt!
Shaft seal: carbon ceramic mechanical seal and NBR
Material impeller: Noryl
Material pump housing: Stainless steel 304
Material pump shaft: Stainless steel 316
Liquids: clean water, maximum 40 °C
12-volt version available on request
Suction height: 8.0 metre on using foot valve
Cut-in pressure: 2.0 bar: 3,300 L/h, standard setup
Cut-out pressure: 3.0 bar
Dimensions: l x w x h = 380 x 160 x 331 mm, without boiler
Weight: 8.5 kg, without boiler
Insulation class: IP55
Motor type: brushless motor
Amperage: 3.6 A
Shaft power: 0.55 kW, 0.75 hp, 2,800 tpm
| Product code | 97.34.231 |
| Number of tapping points | Geyser and 3 tapping points |
| Suction head | 8.0 m |
| Pipe diameter pressure | 1" |
| Pipe diameter suction | 1" |
| Model | No container |
| Pump type | Pressurrized water |
| Medium | Water |
| Particle size | 2 mm |
| Discharge head Max. | 35.0 m |
| Voltage | 230 V |
| Current | AC |
| Frequency | 50 Hz |
| Fuel | - |
| Protection class | IP55 |
| ATEX | No |
| Separate float switch | - |
| Free flow (L/Hour) | 3300 |
| Capacity 5 meter (L/hour) | 3300 |
Not been able to find what you are looking for?
Please do not hesitate to contact us by phone or email.