Zoom image
HEWA 80/110 400V
HEWA 80/110 400V
Do you want to order our products?
Description
If you are interested in our products, you can apply for an account with us. However, we do impose a few conditions for our customers. End users/shipping companies in the Inland Shipping sector and private individuals can only order our products through our dealer network. For more information about our dealer network, you can always contact us. ContactProduct Description
Deck wash and bilge pump based on the original moulds of the former K&R SAE pump series.
Reliable pumps with impressive pressure and/or volume performance.
Affordable and reliable.
Use as deck wash pump, for jet-washing holds, as a fire pump, for overhead irrigation, for ballast water, drainage and as a general service pump.
Type: HEWA
Colour: blue
Type pump: self-priming centrifugal pump
Impeller type: open impeller
Type of motor: squirrel-cage motor
Fuse: NOT built-in
Insulation class: IP55
Seal: carbon on SiC mechanical seal with viton
Material impeller: bronze
Material wear plate: bronze
Material pump housing: cast iron
Material pump shaft: Stainless steel A4
Liquids: clean and contaminated liquids with relatively coarse constituents, such as water, sea water, etc.
30 metres head: 70,000 litres per hour
35 metres head: 63,000 litres per hour
40 metres head: 52.500 litres per hour
45 metres head: 42.000 litres per hour
50 metres head: 28.000 litres per hour
Dimensions: LxWxH 763 x 365 x 459 mm
Weight: 166 kg
Current: 19.5 amp
Shaft power: 11.0 kW, 14.6 hp, 2,900 rpm
Reliable pumps with impressive pressure and/or volume performance.
Affordable and reliable.
Use as deck wash pump, for jet-washing holds, as a fire pump, for overhead irrigation, for ballast water, drainage and as a general service pump.
Type: HEWA
Colour: blue
Type pump: self-priming centrifugal pump
Impeller type: open impeller
Type of motor: squirrel-cage motor
Fuse: NOT built-in
Insulation class: IP55
Seal: carbon on SiC mechanical seal with viton
Material impeller: bronze
Material wear plate: bronze
Material pump housing: cast iron
Material pump shaft: Stainless steel A4
Liquids: clean and contaminated liquids with relatively coarse constituents, such as water, sea water, etc.
30 metres head: 70,000 litres per hour
35 metres head: 63,000 litres per hour
40 metres head: 52.500 litres per hour
45 metres head: 42.000 litres per hour
50 metres head: 28.000 litres per hour
Dimensions: LxWxH 763 x 365 x 459 mm
Weight: 166 kg
Current: 19.5 amp
Shaft power: 11.0 kW, 14.6 hp, 2,900 rpm
- 92.07.641 - HEWA 80/110 400V - Pump curve
| Product code | 92.07.641 |
| Suction head | 8.0 m |
| Pipe diameter pressure | DN 80 Flange |
| Pipe diameter suction | DN 80 Flange |
| Pump type | Dry set-up pump: self-priming |
| Medium | Water |
| Medium | Water with coarse components |
| Particle size | 8 mm |
| Discharge head Max. | 54.0 m |
| Voltage | 400 V |
| Current | AC |
| Frequency | 50 Hz |
| Fuel | - |
| Protection class | IP55 |
| ATEX | No |
| Separate float switch | - |
| Free flow (L/Hour) | 70000 |
| Capacity 5 meter (L/hour) | 70000 |
Not been able to find what you are looking for?
Please do not hesitate to contact us by phone or email.