Zoom image
RAPID SETTING CEMENT EMMER 6KG
RAPID SETTING CEMENT EMMER 6KG
Do you want to order our products?
Description
If you are interested in our products, you can apply for an account with us. However, we do impose a few conditions for our customers. End users/shipping companies in the Inland Shipping sector and private individuals can only order our products through our dealer network. For more information about our dealer network, you can always contact us. ContactProduct Description
Quick-curing cement for repairs to masonry and concrete.
Field of application
Suitable for repairs to masonry and concrete.
Applicable for e.g. fixing bolts, hooks and screws, repairing leaks in masonry and concrete.
Properties
Very fast
Conditions for use:
Use only at temperatures between +5ºC and +25ºC.
Personal protection:
Wear gloves and safety goggles.
Requirements surfaces:
The substrate must be sufficiently firm, clean and free of grease.
Remove loose particles.
Pre-treatment surfaces:
Slightly moisten dry substrates.
Tools:
Smoothing trowel, trowel, putty knife.
Use instructions:
Mix 3 parts Snelcement with 1 part water to a firm homogeneous paste.
Apply the paste immediately (within one minute) with smoothing trowel, trowel or putty knife.
After use, immediately close container tightly.
Stains/Residues:
Wet Snelcement residues must be removed immediately with water.
Dried Snelcement residues can only be removed mechanically.
Residues:
At low temperatures, curing can be accelerated by using lukewarm or warm water.
For larger repairs, make a mixture of Snelcement, water and fine sand.
Field of application
Suitable for repairs to masonry and concrete.
Applicable for e.g. fixing bolts, hooks and screws, repairing leaks in masonry and concrete.
Properties
Very fast
Conditions for use:
Use only at temperatures between +5ºC and +25ºC.
Personal protection:
Wear gloves and safety goggles.
Requirements surfaces:
The substrate must be sufficiently firm, clean and free of grease.
Remove loose particles.
Pre-treatment surfaces:
Slightly moisten dry substrates.
Tools:
Smoothing trowel, trowel, putty knife.
Use instructions:
Mix 3 parts Snelcement with 1 part water to a firm homogeneous paste.
Apply the paste immediately (within one minute) with smoothing trowel, trowel or putty knife.
After use, immediately close container tightly.
Stains/Residues:
Wet Snelcement residues must be removed immediately with water.
Dried Snelcement residues can only be removed mechanically.
Residues:
At low temperatures, curing can be accelerated by using lukewarm or warm water.
For larger repairs, make a mixture of Snelcement, water and fine sand.
| Product code | 49.02.506 |
| EAN code | 08714321001548 |
| Capacity | 6 kg |
| Colour | Grey |
| Packaging | Pail |
| Acidity | pH 12 |
Not been able to find what you are looking for?
Please do not hesitate to contact us by phone or email.