Zoom image
SPECK PRESSURIZED WATER SYSTEM PM20 + 300L GALVANISED VESSEL WITHOUT MOTOR
SPECK PRESSURIZED WATER SYSTEM PM20 + 300L GALVANISED VESSEL WITHOUT MOTOR
Multiple variants available
Select the desired variant below or click on the button to view & order all variants.
Do you want to order our products?
Description
If you are interested in our products, you can apply for an account with us. However, we do impose a few conditions for our customers. End users/shipping companies in the Inland Shipping sector and private individuals can only order our products through our dealer network. For more information about our dealer network, you can always contact us. ContactProduct Description
Professional water pressurization system for inland shipping, seagoing shipping and recreational craft.
For many years the top selling pressurized water system in inland shipping.
Comes with pressure vessel, non-return valve, manometer, pressure switch and if required electric pump.
Type: PM (Pumpmeister)
Colour: light green
Pump type: self-priming plunger pump
Impeller type: plunger (piston)
Motor type: brushless motor
Shaft seal: stop bush
Material plunger: Simrit
Material cyl. bus: brass
Material pump housing: cast iron
Material pump shaft: stainless steel
Liquids: clean water
Voltage: 12 V DC
Voltage: 24 V DC (2 year IDEAAL guarantee)
Voltage: 230 V mains
Voltage: 400 V three phase
Capacity: 2,000 litres per hour at 3.5 bar
Type pressure vessel: horizontal 300 l. galvanized vessel with approx. 40 litres useful water capacity
Switch on pressure: 2.0 bar
Switch off pressure: 3.5 bar
Suitable for: geyser and 2 to 6 draw off points*
Dimensions: lxwxh = 1400 x 580 x 980 mm**
Weight: 97 kg**
Amperage: 230 V, 4.4 A
Amperage: 400 V, 1.7 A
Shaft power: 0.37 kW, 0.50 hp at 1,450 rpm
Must be connected up by an accredited installer.
Most dimensions relate to 24 volt motor.
* Not in use simultaneously.
** Dimensions and weight depend on motor type.
For many years the top selling pressurized water system in inland shipping.
Comes with pressure vessel, non-return valve, manometer, pressure switch and if required electric pump.
Type: PM (Pumpmeister)
Colour: light green
Pump type: self-priming plunger pump
Impeller type: plunger (piston)
Motor type: brushless motor
Shaft seal: stop bush
Material plunger: Simrit
Material cyl. bus: brass
Material pump housing: cast iron
Material pump shaft: stainless steel
Liquids: clean water
Voltage: 12 V DC
Voltage: 24 V DC (2 year IDEAAL guarantee)
Voltage: 230 V mains
Voltage: 400 V three phase
Capacity: 2,000 litres per hour at 3.5 bar
Type pressure vessel: horizontal 300 l. galvanized vessel with approx. 40 litres useful water capacity
Switch on pressure: 2.0 bar
Switch off pressure: 3.5 bar
Suitable for: geyser and 2 to 6 draw off points*
Dimensions: lxwxh = 1400 x 580 x 980 mm**
Weight: 97 kg**
Amperage: 230 V, 4.4 A
Amperage: 400 V, 1.7 A
Shaft power: 0.37 kW, 0.50 hp at 1,450 rpm
Must be connected up by an accredited installer.
Most dimensions relate to 24 volt motor.
* Not in use simultaneously.
** Dimensions and weight depend on motor type.
- 97.72.002 - 300L HYDROFOOR SPECK PM20 ZONDER MOTOR - Exploded view
| Product code | 97.72.002 |
| Number of tapping points | Geyser and 6 tapping points |
| Suction head | 8.0 m |
| Pipe diameter pressure | 1" |
| Pipe diameter suction | 1" |
| Pump type | Pressurrized water |
| Medium | Water |
| Particle size | 2 mm |
| Discharge head Max. | 35.0 m |
| Voltage | - (Zonder motor) |
| Current | - |
| Frequency | - |
| Fuel | - |
| Protection class | IP68 |
| ATEX | - |
| Separate float switch | - |
| Free flow (L/Hour) | 2000 |
| Capacity 5 meter (L/hour) | 2000 |
Not been able to find what you are looking for?
Please do not hesitate to contact us by phone or email.