Zoom image
STORK KGEF 11-4 400V
STORK KGEF 11-4 400V
Do you want to order our products?
Description
If you are interested in our products, you can apply for an account with us. However, we do impose a few conditions for our customers. End users/shipping companies in the Inland Shipping sector and private individuals can only order our products through our dealer network. For more information about our dealer network, you can always contact us. ContactProduct Description
Well-known and well-made self-priming pump for dirty water. Can be used as a bilge, deck wash, dewatering, sprinkling and fire extinguishing pump.
Type: KGEF
Colour: blue
Pump type: self-priming centrifugal pump
Impeller type: open impeller or closed impeller
Motor type: short circuit motor
Fuse: not inbuilt
Shaft seal: ceramic on carbon mechanical seal
Material impeller: polyamide
Material: pump housing: cast iron (bronze)*
Material: pump shaft: chromed steel
Liquids: contaminated liquids such as water, sea water, diesel, gas oil and fuel oil (maximum temperature +95°C)
10 metres head: 18,000 litres per hour
15 metres head: 7,000 litres per hour
Impeller type: open polyamide impeller
Connections: 1.1/2" internal thread
Dimensions: lxwxh = 429 x 190 x 290 mm
Weight: 27 kg
Amperage: 2.6 A+
Shaft power: 1.1 kW, 1.5 hp, 2850 rpm
* Available on request
* So too is complete Ni-resist
* When starting up the pump always check the amperage on the electric motor's nameplate. Small differences between different motors are possible.
Type: KGEF
Colour: blue
Pump type: self-priming centrifugal pump
Impeller type: open impeller or closed impeller
Motor type: short circuit motor
Fuse: not inbuilt
Shaft seal: ceramic on carbon mechanical seal
Material impeller: polyamide
Material: pump housing: cast iron (bronze)*
Material: pump shaft: chromed steel
Liquids: contaminated liquids such as water, sea water, diesel, gas oil and fuel oil (maximum temperature +95°C)
10 metres head: 18,000 litres per hour
15 metres head: 7,000 litres per hour
Impeller type: open polyamide impeller
Connections: 1.1/2" internal thread
Dimensions: lxwxh = 429 x 190 x 290 mm
Weight: 27 kg
Amperage: 2.6 A+
Shaft power: 1.1 kW, 1.5 hp, 2850 rpm
* Available on request
* So too is complete Ni-resist
* When starting up the pump always check the amperage on the electric motor's nameplate. Small differences between different motors are possible.
| Product code | 92.05.114 |
| Suction head | 8.4 m |
| Pipe diameter pressure | 1.1/2" |
| Pipe diameter suction | 1.1/2" |
| Pump type | Dry set-up pump: self-priming |
| Medium | Water |
| Particle size | 12 mm |
| Discharge head Max. | 17.5 m |
| Voltage | 400 V |
| Current | AC |
| Frequency | 50 Hz |
| Fuel | - |
| Protection class | IP68 |
| ATEX | No |
| Separate float switch | - |
| Free flow (L/Hour) | 19500 |
| Capacity 5 meter (L/hour) | 19500 |
Not been able to find what you are looking for?
Please do not hesitate to contact us by phone or email.