Zoom image
GEARWHEEL PUMP GEAR 2400/40L-10BT
GEARWHEEL PUMP GEAR 2400/40L-10BT
Multiple variants available
Select the desired variant below or click on the button to view & order all variants.
Do you want to order our products?
Description
If you are interested in our products, you can apply for an account with us. However, we do impose a few conditions for our customers. End users/shipping companies in the Inland Shipping sector and private individuals can only order our products through our dealer network. For more information about our dealer network, you can always contact us. ContactProduct Description
The pumps can be used for transporting low viscosity and lubricating liquids without solids or abrasive components, such as diesel oil, light lubricating oil, spindle oil, preheated grease and gas oil.
Type: GEAR
Colour: blue
Special feature: inbuilt overflow valve (maximum of 10 bar), NOT ADJUSTED
Pump type: gearwheel pump, limited self-priming
Impeller type: gearwheels
Motor type: 400 volt short circuit motor (normalized flange motors)
Fuse: NOT inbuilt
Shaft seal: carbon on hard metal mechanical seal
Material gearwheels: steel*
Material pump housing: cast steel*
Material pump shaft: toughened steel*
* Available in bronze or stainless steel for the foodstuffs industry
Liquids: clean lubricating oil and neutral low viscosity liquids with lubricating properties, maximum 140°C
Viscosity: maximum 20 Engler
Viscosity: has a very big effect on capacity, maximum 20 Engler
Capacities: measured with water
No head: 33 litres per minute
Suction head: depends on viscosity
Particle size: zero
Dimensions: lxwxh = 465 x 200 x 260 mm
Weight: 21 kg
Amperage: 400 V, 2,5 A
Shaft power: 1.1 kW, 1.5 hp, 1400 rpm
Type: GEAR
Colour: blue
Special feature: inbuilt overflow valve (maximum of 10 bar), NOT ADJUSTED
Pump type: gearwheel pump, limited self-priming
Impeller type: gearwheels
Motor type: 400 volt short circuit motor (normalized flange motors)
Fuse: NOT inbuilt
Shaft seal: carbon on hard metal mechanical seal
Material gearwheels: steel*
Material pump housing: cast steel*
Material pump shaft: toughened steel*
* Available in bronze or stainless steel for the foodstuffs industry
Liquids: clean lubricating oil and neutral low viscosity liquids with lubricating properties, maximum 140°C
Viscosity: maximum 20 Engler
Viscosity: has a very big effect on capacity, maximum 20 Engler
Capacities: measured with water
No head: 33 litres per minute
Suction head: depends on viscosity
Particle size: zero
Dimensions: lxwxh = 465 x 200 x 260 mm
Weight: 21 kg
Amperage: 400 V, 2,5 A
Shaft power: 1.1 kW, 1.5 hp, 1400 rpm
| Product code | 93.90.541 |
| Suction head | 3.5 m |
| Pipe diameter pressure | 1" |
| Pipe diameter suction | 1" |
| Pump type | Toothed wheel pump |
| Medium | Lubricating oil |
| Particle size | 2 mm |
| Discharge head Max. | 100.0 m |
| Voltage | 400 V |
| Current | AC |
| Frequency | 50 Hz |
| Fuel | - |
| Protection class | IP68 |
| ATEX | No |
| Separate float switch | - |
| Free flow (L/Hour) | 2000 |
| Capacity 5 meter (L/hour) | 2000 |
Not been able to find what you are looking for?
Please do not hesitate to contact us by phone or email.