Zoom image
ZENIT ATEX DRG 75/2/G40 400V
ZENIT ATEX DRG 75/2/G40 400V
Multiple variants available
Select the desired variant below or click on the button to view & order all variants.
Do you want to order our products?
Description
If you are interested in our products, you can apply for an account with us. However, we do impose a few conditions for our customers. End users/shipping companies in the Inland Shipping sector and private individuals can only order our products through our dealer network. For more information about our dealer network, you can always contact us. ContactProduct Description
Submersible pump for pumping out bilge water on ADN vessels.
Type: DRG
Colour: grey
Pump type: completely submersible centrifugal pump
Impeller type: single-channel impeller
Motor type: dry motor
Submersion depth: 5 metres
Fuse: for 400 volt a motor safeguarding switch in the cable is necessary
Shaft seal: drive lube seal system, oil chamber with 2 shaft seals, both wear resistant silicon carbide on silicon carbide and extra lip seal at motor bearing
Material impeller: cast iron EN-GJL 250
Material impeller housing: cast iron EN-GJL 250
Material motor housing: cast iron EN-GJL 250
Material pump shaft: Stainless steel AISI 431
Liquids: contaminated water containing solids, maximum temperature +40°C
Insulation class: IP68
ATEX: II 2G
ATEX: Ex db IIB T4 Gb
ATEX: Ex h IIB T4 Gb
10 metre head: 2,000 litres per hour
Pumps down to: 70 mm maximum
Connection: 1.1/2" internal thread
Dimensions: diameter 255 mm (incl. knee), height 488 mm
Weight: 24.0 kg
Amperage: 400 V, 1.4 A
Shaft power: 0.55 kW, 0.7 hp, 2900 rpm
Cable: 10 metre neoprene H07RN-F without plug
Type: DRG
Colour: grey
Pump type: completely submersible centrifugal pump
Impeller type: single-channel impeller
Motor type: dry motor
Submersion depth: 5 metres
Fuse: for 400 volt a motor safeguarding switch in the cable is necessary
Shaft seal: drive lube seal system, oil chamber with 2 shaft seals, both wear resistant silicon carbide on silicon carbide and extra lip seal at motor bearing
Material impeller: cast iron EN-GJL 250
Material impeller housing: cast iron EN-GJL 250
Material motor housing: cast iron EN-GJL 250
Material pump shaft: Stainless steel AISI 431
Liquids: contaminated water containing solids, maximum temperature +40°C
Insulation class: IP68
ATEX: II 2G
ATEX: Ex db IIB T4 Gb
ATEX: Ex h IIB T4 Gb
10 metre head: 2,000 litres per hour
Pumps down to: 70 mm maximum
Connection: 1.1/2" internal thread
Dimensions: diameter 255 mm (incl. knee), height 488 mm
Weight: 24.0 kg
Amperage: 400 V, 1.4 A
Shaft power: 0.55 kW, 0.7 hp, 2900 rpm
Cable: 10 metre neoprene H07RN-F without plug
- 91.69.423 - ZENIT ATEX DRG 75-2-G40 400V - Datasheet
- 91.69.423 - ZENIT ATEX DRG 75-2-G40 400V - Dimensions
- 91.69.423 - ZENIT ATEX DRG 75-2-G40 400V - Pump curve
| Product code | 91.69.423 |
| Pipe diameter pressure | 1.1/2" |
| Pipe diameter suction | - |
| Pump type | Submersible pump |
| Medium | Water |
| Particle size | 10 mm |
| Discharge head Max. | 10.5 m |
| Voltage | 400 V |
| Current | AC |
| Frequency | 50 Hz |
| Protection class | IP68 |
| ATEX | Yes |
| Separate float switch | No |
| Free flow (L/Hour) | 21600 |
| Capacity 5 meter (L/hour) | 15600 |
Not been able to find what you are looking for?
Please do not hesitate to contact us by phone or email.