ZETTEX POLYMER MS60 290ML BROWN

Zettex MS 60 Polymer is a universal adhesive and construction joint seal for adhering all kinds of materials with the exception of PE and PP. This polymer can be used on any surface; is extremely versatile and the answer for any requested adhesion. Zettex MS 60 is completely free of solvents, plasticizers, silicons and isocyanates. The MS60 is our most proved formulation and is even certified for applications with direct food contact.

Advantages
• Durably elastic.
• High absorption of acoustic vibrations.
• Fast-curing, 3 mm per 24 hours.
• No shrinkage.
• High mechanical resistance.
• Mould and bacteria resistant.
• No edging contamination with marble and natural stone.
• Isocyanate-, solvent- and silicone-free.
• Can be painted over with most water-based and 2K paint systems.

Uses:
For the adhesion of all metals, woods, EPDM, lead, zinc, copper, mirrors, stone, polystyrene, synthetics and concrete and types of natural stone. Can be used to replace all kinds of adhesives with its versatility.

Chemical resistance
Good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes.

Application instructions
Always read the safety information before use. Surfaces must be free of dust and grease. Apply adhesive with the Zettex Caulkgun on the one side of the material to be adhered in lines at distances of 10 to 20 cm. It is not recommended to use pads. If necessary, apply Zettex Primer Z-05 for improved adhesion. If necessary, apply Zettex Fixerband to the materials to be fixed. After application give the materials the necessary support for 24 hours. If necessary, finish Zettex MS 60 Polymer with Zettex Easy Finish. After use clean materials with Zettex Profireiniger.